Unsolved
5 Posts
0
463
March 6th, 2023 10:00
Spine-Leaf connection between sites.
Hi!
I have two Spine-Leaf structures (identical, composed of two spines S5232, and 8 leafs S5248 on each site). These structures are divided into Site A and Site B. I checked the documentation, and in my understanding, the connection between these two sites needs to be done between leaves and not between spines. This is right? The connection between sites (spine to spine) isn't supported?
If someone can help, I would appreciate it!
Thanks!
No Events found!
DELL-Young E
Moderator
•
5.1K Posts
0
March 6th, 2023 17:00
Hello could you please refer to the docs here?
https://dell.to/3mk4Hsf
https://dell.to/3ZHU016
https://dell.to/3yiqXFM
TechGuyBR
5 Posts
0
March 7th, 2023 09:00
Thanks for your quick response and help!
I read these documents, but I didn't find helpful information about this specific subject (interconnect between sites). These Spine-Leaves networks are Layer 2, during the reading of Leaf-Spine Deployment and Best Practices Guide in my understanding, the interconnect need to be done between leaves on each site. But I'm not sure at this time about this.
Regards!
DELL-Chris H
Moderator
•
9.4K Posts
0
March 7th, 2023 10:00
TechGuyBR,
As seen in the image below the comminication is originated from the leaves to the other networks.
Let me know if this helps.
TechGuyBR
5 Posts
0
April 11th, 2023 14:00
I read more documents about this. I performed the connection at the "leaf" level, and everything is going well.
Thanks all for the help!