Unsolved
7 Posts
0
330
June 21st, 2022 07:00
setup LACP between N4064 and two S4148T-ON switches
trying to setup good LACP so in case one switch fail we still have good connection with other switch, my both interfcace is not coming up only 1 stay is up, can some one please help to configure it correct.
#######N4064 ####### config
Show runnning-config interface port-channel 106
# spanning-tree disable
# switch-port mode general
# switch-port trunk allowed vlan 1
show interface port-channel 106
channel 106 Port : active Te1/0/47, Inactive:te1/0/48 ch-type: Dynamic
##### S4148T-ON ######## switch 1
switch1# show running-config interface port-channel 106
switch1# switch port access vlan1
switch1# spanning-tree disable
##### S4148T-ON ######## switch 2
switch2# show running-config interface port-channel 106
switch2# switch port access vlan1
switch2# spanning-tree disable
DELL-Chris H
Moderator
•
9.4K Posts
0
June 21st, 2022 12:00
GSFC,
We unfortunately can't assist directly in initial configurations as there are some Dell Professional services that can handle this task on your behalf. What I would suggest is to look at the logs and see if it is reporting any errors. Also you may want to look at the post here, as it covers the same issue and has some steps to look at.
Let me know how it goes.