1 Rookie
•
2 Posts
0
22
November 20th, 2024 21:17
S5448 to S4048
I am trying to connect a S5448-on to a S40480-on I have the interfaces up over 40GB networking but it is not passing my tagged or untagged traffic. my config of the 5448 is
interface ethernet 1/1/3:1
description Uplink_to_Core
no shutdown
switchport mode trunk
flowcontrol receive off
config of 4048
interface fortyGigE 4/53
description **100gb-Uplink
no ip address
switchport
switchport mode private-vlan trunk
no shutdown
intf-type cr4 autoneg
I see that both ports are up, but a am unable to ping anything on the other side.
No Events found!
DELL-Joey C
Moderator
•
3.9K Posts
0
November 21st, 2024 03:11
Hi,
For S5448-ON, it is on OS10 whilst S4048-ON is on OS9. The configuration might vary a wee bit.
You can refer to OS10 to tag and untag VLAN: https://dell.to/4hW4JPr
This is for reference to have native access VLAN and untag VLAN for OS10: https://dell.to/4fBML3c
And here's OS9 to tag and untag VLAN: https://dell.to/4fCJtwr