S4048ON switch stack disable SNMP trap and enable SNMP server

Hello @R Paul,

I've consulted on one of the switch support colleague, to disable SNMP trap, you can run the command #no snmp-server enable traps ecmp. In order for you to enable SNMP server, you will need to configure snmp-server in your server and configured it. Then based snmp-server configured on system, you have to configure snmp-server community, view, groups etc on switch.

Here the switch user guide for reference: https://dell.to/3lhntwv page 1532 onwards.

To enable the SNMP trap on your device you need to make some changes to your server configure SNMP-server and it will be enabled. For disabling the same run a #no SNMP-server enable traps ecmp command on your device. This will definitely help in enabling and disabling the SNMP trap.