15 Posts
0
423
August 29th, 2022 02:00
S3100 change boot order of the stack-units
Hi good morning.
I have several stacks of DELL S3148P with unaligned boot partition.
show boot system stack-unit all
Current system image information in the system:
===============================================
Type Boot Type A B
----------------------------------------------------------------------------------------------
stack-unit 1 FLASH BOOT 9.11(2.0) 9.14(2.14)[boot]
stack-unit 2 FLASH BOOT 9.14(2.14)[boot] 9.14(2.14)
boot system stack-unit 2 default system: B:
reset stack-unit 2 hard
or
power-cycle stack-unit 2
but the stack-unit 2 keeps booting from A: instead of B:
Any thoughts?
No Events found!
DELL-Charles R
Moderator
•
4.4K Posts
1
August 29th, 2022 07:00
Hello dinistic,
I think this may be what you are looking for.
Change the primary boot parameter to the upgraded partition (A: or B:).
DellEMC(conf)#boot system stack-unit all primary system: b:
Then write memory and reload
Page: 8 - Dell Networking S3100 Series 9.14(2.16) Release Notes
https://dell.to/3AWznEI
dinistic
15 Posts
0
August 29th, 2022 08:00
worked like a charm!
I thought I could do that only for stack-unit 2 and reload only stack unit 2.