Unsolved
1 Rookie
•
4 Posts
0
563
April 12th, 2023 14:00
Powerconnect 5548 adding promiscuous mode
I have a set of Powerconnect 5548 switches that I need to turn promiscuous mode on for a XDR solution to monitor All traffic on the switch.. I have searched on how to enable it for a port but can see the question being asked but no solution.
Is there any instuctions on how to do this?
No Events found!
DELL-Joey C
Moderator
•
3.9K Posts
0
April 12th, 2023 19:00
Hi @EdQthe1,
Here's the guide for promiscuous mode on private VLAN page 498: https://dell.to/3o78k5O
EdQthe1
1 Rookie
•
4 Posts
0
April 17th, 2023 08:00
Thank you but only referances the command to do. I did the command, and tryed Wireshark and do not see any extra traffic on the port. I have one VLAN.
DELL-Joey C
Moderator
•
3.9K Posts
0
April 17th, 2023 18:00
Hi @EdQthe1,
Maybe this would help your configuration example related to this: https://dell.to/41ci9Ou
EdQthe1
1 Rookie
•
4 Posts
0
April 20th, 2023 06:00
I'm trying this commands. But it says unrecognized command
MTSSagMainSwitches# configure
MTSSagMainSwitches(config)# vlan 500
MTSSagMainSwitches(config)# private-vlan
% Unrecognized command
MTSSagMainSwitches# configure
MTSSagMainSwitches(config)# vlan 500
MTSSagMainSwitches(config)# private-vlan
% Unrecognized command
MTSSagMainSwitches(config)# private-vlan
% Unrecognized command
MTSSagMainSwitches(config)# private-vlan
MTSSagMainSwitches(config)# private-vlan
% Unrecognized command
MTSSagMainSwitches(config)#
DELL-Charles R
Moderator
•
4.4K Posts
0
April 20th, 2023 08:00
Hello EdQthe1,
What is the result from this command:
Console# show vlan private-vlan