[MX9116n OS10 10.5.5.1] - Via Chassis Console - Serial Connect to Switch for entering ONIE - Prompt for Username and Password

Goodafternoon All,

I did a SSH session to my chassis where the Switch A1 is located. I used a getmodinfo to identify the A1 switch. 

I did a "racadm connect -m Switch-1" command and logged in with my admin account. 

I did a reload to reboot the switch I am connected to.

I pressed constantly Esc to stop the switch from booting the A or B partition. I used the arrow keys to go to the *ONIE in the GNU GRUB.

After entering the ONIE it is asking for a Username and Password. I tried all my passwords (Admin/Linuxadmin) and I tried plenty of default password.

How do I recover the password of the ONIE?

- I also did a delete startup-configuration to wipe the OS10 data.

- I also sent someone from the datacenter-team physically to the switch to find any factory reset button but unfortunately....