1 Rookie
•
15 Posts
0
587
November 21st, 2022 09:00
More than 1 VLT Domain for a single switch pair?
Is there ever a scenario where you might want to add more than one domain when you only have a single pair of switches?
In the documentation, you only ever see one domain configured.
I am curious.
Currently I have a pair of S5148f running OS10
Thanks
Hatter
No Events found!
- Muzz -
1 Rookie
•
19 Posts
0
November 22nd, 2022 10:00
Hello again,
In OS9 you were allowed to utilize multiple VLT-domains Switch A& B would be in VLT-domain#1 while switch B & C could be in VLT-domain#2 .
However it is practically pointless and more a side effect of the technology than a desired effect.
In OS10 I'm not even sure it is even allowed but then again as stated it is a pointless design and not one that is recommended and thus not supported.
Remember VLT is not a stack and should by no means be incorporated as such.
DELL-Young E
Moderator
•
5.1K Posts
0
November 21st, 2022 22:00
Hi, please see the attached. I hope these helps.
https://dell.to/3UYe3qc
1 Attachment
a180d644-4d37-491e-af06-72a5a711ebff-314822366.png
madhatterfounder
1 Rookie
•
15 Posts
0
November 22nd, 2022 04:00
That's for 2 pairs of switches. Im guessing there is no reason to configure more than one VLT Domain for a single pair of switches.