Unsolved
1 Rookie
•
5 Posts
0
453
December 19th, 2022 05:00
Intel 10GbE 2P X710 Adapter on R730xd server
Hello,
I have inserted an X710 adapter, it shows on idrac the nic, but the system is not listing the nic on the system. It only shows the integrated nics on lspci.
Idrac Version: 2.83.83.83
Bios Version: 2.16.0
SO: Centos 7
The lspci exit only showing the integrated nics is bellow.
# lspci -nn | grep -i eth
01:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5720 2-port Gigabit Ethernet PCIe [14e4:165f]
01:00.1 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5720 2-port Gigabit Ethernet PCIe [14e4:165f]
02:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5720 2-port Gigabit Ethernet PCIe [14e4:165f]
02:00.1 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5720 2-port Gigabit Ethernet PCIe [14e4:165f]
What should I do to make them apear to the SO?
Regards,
arisjr
No Events found!
DELL-Chris H
Moderator
•
9.4K Posts
0
December 19th, 2022 12:00
Arisjr,
Just to eliminate compatibility as a variable, woutd you confirm the specific part number of the X710 card? That way I can verify if it was intended to be used on the platform.
Let me know what you see.
arisjr
1 Rookie
•
5 Posts
0
December 19th, 2022 13:00
Hi @DELL-Chris H ,
I can't tell right now because the idrac 8 does not show this information. What I can say at this moment is that the NIC was removed from a r740xd server and inserted on this r730xd server.
As soon I get near the server, that must be tomorrow morning, I will open the server and check the NIC part number.
Regards,
arisjr
1 Rookie
•
5 Posts
0
December 21st, 2022 07:00
Hi @DELL-Chris H
I found what could be the part number, check if this is right: "DP/N 0Y5M7N"
Thanks and regards
DELL-Chris H
Moderator
•
9.4K Posts
0
December 21st, 2022 08:00
Arisjr,
That card is indeed supported on the R730xd, as well as the R740 too. What I would look into is if the server is up to date on BIOS, iDrac, perc, and lastly the nic, afterwards let me know what you see.
arisjr
1 Rookie
•
5 Posts
0
December 22nd, 2022 07:00
@DELL-Chris H
I have done the steps as recommended, BIOS, IDRAC, Perc, but on the NIC update, idracs says that was "Unable to complete the firmware update operation because the specified firmware image is for a component that is not in the target system inventory."
The update file: Network_Firmware_YP4R0_WN64_19.5.12_A00.EXE
DELL-Chris H
Moderator
•
9.4K Posts
0
December 22nd, 2022 09:00
arisjr,
Based on the OS installed, have you tried one of the other versions of the download?
arisjr
1 Rookie
•
5 Posts
0
December 23rd, 2022 02:00
I tried the linux version, and the same result come out:
DELL-Marco B
Moderator
•
3.8K Posts
0
December 23rd, 2022 09:00
Hello,
can you try to peform the upgrade using a support live image?
https://dell.to/3YP9uAH
just to exclude an OS compatibility issue.
Thanks