Unsolved
5 Posts
0
186
June 8th, 2023 10:00
Install redundant S4048 Switches
Currently we have a Dell 9010 linked LACP to Dell S4048 as a TOR. Then to our access equipment. We would like to put in A redundant Dell S4048. Just need some examples of the config. So i don't create a loop.
Gary
No Events found!
DELL-Young E
Moderator
•
5.1K Posts
0
June 8th, 2023 21:00
Hello, thanks for choosing Dell. The best way for all of us is that you share the switch logs for configuration checking. https://dell.to/3ClsYD8 In the meantime please refer to the attached.
1 Attachment
0dd5123b-36bb-4a87-8070-e7a69a6da493-687998945.png
mtcctech
5 Posts
0
June 12th, 2023 10:00
I have it setup like in the diagram. If i simulate an sfp failer it fails over fine. If is simulate a switch power loss/failure it does not fail over.
Gary
DELL-Charles R
Moderator
•
4.4K Posts
0
June 12th, 2023 11:00
Hello mtcctech,
This may help:
Configure Redundant Pairs
https://dell.to/3CmloIm
Please note we are unable assist directly in making New Configurations, but we do have professional services which can help you to deploy the configuration you need. You may consider contacting Dell Sales department for a professional Deployment Services if needed. I hope the resource I am able to supply will be helpful for you.