1 Rookie
•
23 Posts
0
292
March 2nd, 2022 23:00
I want to check the servicing capabilities of my OS10 Dell switch.
Hello
The OS10 Dell Switch Security Check wants to verify the following features:
However, if you look at the manual, it does not say whether the service is supported as shown below.
Are the functions in the table not supported by OS10 switches?
If supported, what command can I use to check it?
No Events found!
DELL-Joey C
Moderator
•
3.9K Posts
0
March 4th, 2022 00:00
Hi @dell_sss,
I spoke to one of my co-worker in networking, and he told me that the commands that you referred was in CISCO CLI? Unfortunately OS10 does not have those commands.
DiegoLopez
4 Operator
•
2.7K Posts
0
March 3rd, 2022 08:00
Hello @dell_sss,
What model is your Dell Switch? And what is its firmware version?
Do you need to verify if all this funcions in the table are supported by your switch?
Regards.
dell_sss
1 Rookie
•
23 Posts
0
March 3rd, 2022 17:00
Hello. Thanks for your reply
The switch models currently in use are S3048, S4048, S5248, etc.
And the equipment version is 10.5.2.3.
It is necessary to check whether all the functions in the table are supported and whether they work by default.
I'm also looking for the ARP checking feature on my OS10 Dell switch.
"arp access-list", "no errdisable detection cause arp-inspection" feature not supported on Dell switch?