Start a Conversation

Unsolved

Closed

L

3 Posts

1172

June 12th, 2023 01:00

How to enable snmp v2c on S4148F-ON

I found only a link for snmp v3. I will monitor my switch with prtg, and i will use snmp v2c.

My OS on the switch ist OS Version: 10.5.2.7.

thanks in advance

 

Moderator

 • 

9.4K Posts

June 12th, 2023 06:00

Levadas,

 

The switch does support V1, V2c, and V3 SNMP, as seen on page 58 here

You can find the steps to configure it on page 437 for the GUI, or page 455 for the CLI steps. 

 

Let me know if this helps.

 

 

3 Posts

June 19th, 2023 02:00

Hello,

my snmp did not work.

This are the commands that i was use.

Configure

Snmp-server community xxxx ro

Snmp-server enable traps snmp

Snmp-server host 192.168.20.33 version 2c xxxx

write memory

 

What can i Do ?

Moderator

 • 

2.8K Posts

June 19th, 2023 03:00

Hello, Please verify that the SNMP port (161) and trap port (162) aren't blocked by any firewall or access control list on the switch or the network. You can use the show ip access-lists command to check the access control lists on the switch.

No Events found!

Top