For finding a workable sfp+10gb-T Transceiver on the DELL S4128F-ON ,I need help and advice.

 3 years ago，My company had bought some computer infrastructure equipment 。 I used a dell S4128F-on switch connected to a dell poweredge MX7000 modular.Mx7000 modular contains  MX5108N switch, using one of the qsfp+ port of the switch and a qsfp+40Gb to 4*spf+10Gb 5 meters cable（P8T4W）, connect with a sfp+10Gb port of the S4128F-ON.
It had been working fine.

We recently purchased a poweredge mx7000 blade server, just like my previous machine.

But now there are some problems ， I can't connect the S4128F-on switch with the same cable as before. Because the new mx7000 and S4128F-ON switches are far apart, several cabinets apart，about 10 meters ，Similar to the original cable is only 5 meters ，And there aren't long enough cables。
However, the mx5108N switch has four 10Gb copper cable interfaces, so I wonder if it is possible to install the SFP+-10Gb-T module on the S4128F-ON to connect the 5108N. Within the limits, the length of the copper cable is sufficient.
I know that there is a module for SFP-1gb-t (XTY28) that can be used on the 4128, but I can't find information for sfp+-10Gb-T.
 I searched the Internet and found some models: WP2PP and PGYJT. 
I haven't done this before, so I'm not sure if this solution will work or if there's a better way.
 Anyway, I need them connected with 10Gb bandwidth，not 1Gb.  So I need  help and advice。
=========
Besides, my English is not good enough.
I wrote this post with the help of translation software.
Forgive me if it seems strange。