1 Rookie
•
5 Posts
0
524
November 9th, 2023 14:09
Error from configuring Port Monitoring on switch - Destination port should not be a L2/L3 port
I'm currently working with Dell OS10 switches.
The problem is very simple:
I tried to configure port-mirroring, to clone the packet to another port which locates in same switch.
I attempted to execute commands below, however, I faced an error and got stuck.
OS10(config)# monitor session 1
OS10(conf-mon-local-1)# source interface ethernet 1/1/32 both
OS10(conf-mon-local-1)# destination interface ethernet 1/1/20:1
% Error: Destination port should not be a L2/L3 port
OS10(conf-mon-local-1)#
Seems like I need to configure destination port except L2/L3 port.
However, due to my lack of knowledge, I can't figure out which should I need to configure.
I desperately need help of the experts... 😥
No Events found!
DELL-Charles R
Moderator
•
4.4K Posts
0
November 9th, 2023 20:45
Hello Mitsu_bachi.,
I think this may help Port monitoring :
https://dell.to/3StalXc
Mitsu_bachi.
1 Rookie
•
5 Posts
0
November 22nd, 2023 03:50
@Dell -Charles R
The problem has solved after I followed the instruction above again!
I ignored the step by mistake before, which configures the destination port as "no shutdown / no switchport".
After I executed that two commands, the port-monitoring session has successfully worked!
khsieh
1 Rookie
•
14 Posts
0
June 7th, 2024 06:04
This happens when the destination port is set as a switchport.
configure terminal
interface ethernet 1/1/20:1
description "Destination Interface"
no switchport
exit
nguyenck
1 Rookie
•
15 Posts
0
August 17th, 2024 07:16
@khsieh
my computer connect to interface 1/1/2, after no switch port on interface 1/1/2 SPAN port can config but my computer can not recevie anything from interface 1/1/2
can you show my how your system work
thanks
DELL-Joey C
Moderator
•
3.9K Posts
0
August 19th, 2024 01:30
Hi,
It seems that you have a new post about the same issue here: https://dell.to/46Q3R9U. I've responded to you on that topic.
I'll leave this topic to the public to provide feedback to you whilst we can communicate at the newly posted topic by you.