Does anyone knows how to reset Brocade M6505?

Hello,

Could you take a look at "Setting the boot PROM password for a switch with a recovery string" on page 145 and can you try again? https://dell.to/3FeKklg

1. Connect to the serial port interface as described in “Connecting to Fabric OS through the serial
port” on page 56.
2. Reboot the switch.
3. Press Esc within four seconds after the message “Press escape within 4 seconds...” is
displayed.
The following options are available:
Option Description
1 Start system. Continues the system boot process.
2 Recovery password. Lets you set the recovery string and the boot PROM password.
3 Enter command shell. Provides access to boot parameters.

4. Enter 2.
• If no password was previously set, the following message is displayed:
Recovery password is NOT set. Please set it now.
• If a password was previously set, the following messages is displayed:
Send the following string to Customer Support for password recovery:
afHTpyLsDo1Pz0Pk5GzhIw==
Enter the supplied recovery password.
Recovery Password:
5. Enter the recovery password (string).
The recovery string must be between 8 and 40 alphanumeric characters. A random string that
is 15 characters or longer is recommended for higher security. The firmware prompts for this
password only once. It is not necessary to remember the recovery string, because it is
displayed the next time you enter the command shell.
The following prompt is displayed:
New password:
6. Enter the boot PROM password, and then reenter it when prompted. The password must be
eight alphanumeric characters (any additional characters are not recorded). Record this
password for future use.
The new password is automatically saved.
7. Reboot the switch by typing the reset command at the prompt