3 Posts
0
350
January 11th, 2023 02:00
Dell Switch S4040 - IPV6 Multicast
Hello,
I am using Dell Switch S4040 and my VxRails nodes are connected to this switch ..during vxrail deployment it was able to find nodes but at the end of deployment when you reach "Validate Configuration" it fails with an error " Failed to create a workflow: Cannot find any host by auto-discovery" I need to check the status of my Dell Switch S4040 - IPV6 Multicast enabled or not..can you guys help me with the CLI reference for the same or how do I make sure IPV6 multicast enabled or not
No Events found!
DELL-Erman O
Moderator
•
2.8K Posts
0
January 11th, 2023 06:00
Hello, please check these links
deployment planning https://dell.to/3CIZ6B9
Dell VxRail Network Planning Guide https://dell.to/3iC3if7
VxRail: Initial configuration with external vCenter 7.0 Update 2 fails with error: Failed to add host to VDS VMware HCIA Distributed Switch https://dell.to/3GBEAU2
Hope that helps!