Dell OS10 CoPP policy

Hello,

I'm in the process of implementing a CoPP policy for our Dell OS10 switches and routers. I noticed that very little is described in the documentation: https://www.dell.com/support/manuals/de-de/smartfabric-os10-emp-partner/smartfabric-os-user-guide-10-5-5/configure-control-plane-policing?guid=guid-37e31381-4c5d-4326-a9df-250c0b3a6659&lang=en-us

Apparently, there is a special class-map type "control-plane" that is used explicitly for the control plane.

Can you also use the class map type "qos" for the control plane as with other access lists? With the map type control-plane, it is not possible to restrict access to certain IP addresses. Our goal is that, for example, only certain IP addresses should be able to access the bgp port of the control plane. But with the map type "control-plane" you can't define IP addresses? So would you then have to define a qos policy or apply it to the control plane?

Unfortunately, it's hard to find helpful information about this in the OS10 documentation or from Dell support. It would be great if someone knew something about this.