Dell N2048 default settings

Hello,

Yes, unconfigured ports have default settings and are not displayed with command “show run’.

You can see the list of ports using command:

                             N2048#show interface status

You can see which vlans the ports belongs to with command:

                             N2048#show vlan

You can see all the default setting for one interface, but note that this command should only be used for one interface at a time (or not used at all), because the output is too long:

                             N2048#show running-config interface gi1/0/1 all

                             N2048#show running-config interface gi1/0/2 all