DBG Port is turned off due to Overload

Hello, I'm not familiar with the DBG port. but if you are having problems due to power overload in POE switches, you can disable the power inline. page 2093 https://dell.to/3yhx5gW

console(config)#interface gigabitethernet 1/0/1
console(config-if-Gi1/0/1)# power inline never

After power up, the switch automatically initializes its internal protection
mechanisms. These are utilized to monitor and disconnect power from the
PD in the cases where extreme conditions occur, as specified in the
IEEE802.3AF/AT standard. These conditions include over-current or short
ports terminals scenarios

Lastly, please make sure your switch is up to date. 

Hope that helps!