1 Rookie
•
2 Posts
0
207
January 9th, 2025 02:55
Configure VLT between Dell S4128T-ON and S4148T-ON switches
Hi, I have two Dell Switches, S4128-on and S4148-on, can I configure VLT between them?
thank you all.
No Events found!
1 Rookie
•
2 Posts
0
207
January 9th, 2025 02:55
Hi, I have two Dell Switches, S4128-on and S4148-on, can I configure VLT between them?
thank you all.
Top
DELL-Marco B
Moderator
•
3.9K Posts
1
January 9th, 2025 09:24
Hello,
yes you can see here some information about it
Dell Networking SmartFabric OS10 How to Set Up Virtual Link Trunking | Dell US
in case you need assistance on this you can buy a installation ticket and a team will help you in the configuration.
Thanks
jbemmel
1 Rookie
•
6 Posts
0
January 15th, 2025 19:37
@DELL-Marco B " Virtual Link Trunking aggregates two **identical** physical switches to form a single logical extended switch"
The OP is likely asking if it is supported to use two switches of (slightly) different types, S41**2**8T and S41**4**8T
Officially, I believe this would NOT be supported (untested)
Leon Liao
1 Rookie
•
2 Posts
0
January 16th, 2025 08:09
@jbemmel S4128T and S4148T can build VLT, We use VMware ESXi to test the Ethernet channel line redundancy. The test method is to shut down S4128 and S4148 in turn. The line redundancy test is OK.