Unsolved
1 Rookie
•
14 Posts
0
75
December 12th, 2023 19:13
Change spanning-tree mode on OS10 switches with VLT
We are thinking of changing out spanning-tree mode on a pair of OS10 switches (5248s). They have a VLT between them and we don't expect any mismatch to be very good for us. Is there a recommended way to do this, or should we just connect via console to both and hit the enter keys at the same time as best we can?
No Events found!
DELL-Joey C
Moderator
•
3.9K Posts
1
December 13th, 2023 02:42
Hi,
Well, yes. Changing spanning-tree modes need to take effect as soon as possible on both switches, hence, it's good that you change both switch configurations fast for both switches participate in spanning-tree converge.
apt5
1 Rookie
•
14 Posts
0
December 13th, 2023 12:29
Thank you, Joe. I was thinking in terms of some kind of automated solution where it would happen at exactly the same time (we had an issue with this once where two VLT switches were in different modes, so we have history) but there's a lot to be said for simplicity.
The_LostIT_Guy
1 Rookie
•
80 Posts
0
January 23rd, 2024 14:53
@apt5 Have you looked into Ansible?