Can't configure vlan range on S4810

Hi,

 

I'm trying to configure a range configuration from VLAN 500 to VLAN 1000 on a S4810 but is erroring out:

 

s4810p-stack(conf)#interface range vlan 500 - 1000
^
% Error: In configuration at "^" marker.
s4810p-stack(conf)#

 

If I do it on a normal port, it works fine:

s4810p-stack(conf)#interface range te0/0-5
s4810p-stack(conf-if-range-te-0/0-5)#

 

I can configure the VLAN interface one by one, but that will take too long.

What am I missing here?

Thanks,