Unsolved
1 Rookie
•
15 Posts
0
906
June 22nd, 2021 02:00
nsrlcpd is not running for this jukebox
Hi,
I am unable to write data to tape library,
Library itself is stable.
From networker library getting disabled, if I am enabling also no changes.
I did rename tmp and jobsdb folder and restart server even though same how do i check the communication between networker server and library ? If anybody can help I will be able to call you.
please advise and help.
Rajeesh
No Events found!
bingo.1
2.4K Posts
0
June 22nd, 2021 05:00
Hi Rajeesh,
excuse me - but a bit more info would help upfront. It is not very important for us but YOU want to be helped ... so please provide enough input that someone of the UG will be even able to help!
1. Which OS do you use?
2. Which NW version do you use?
3. Where is the library attached? - to the NW server or to a remote storage node?
4. Is this a new installation? - has it ever worked before?
nsrlcpd is the backround (aka daemon) program which NW needs to control the library. It should be running if the jukebox has been configured and if it is active/enabled. If you cannot access the lib because the program is not running, then it is obvious that something failed when this program will be started.
NW will let you know the reason in the server's file .../nsr/logs/daemon.raw. This is the file where NW logs the events about the background processes/daemons. So here are my suggestions:
1. Learn at least some NW basics. You better do it asap. You need it anyway.
2. Stop the NW server.
3. Rename .../nsr/logs/daemon.raw or make a backup of the file (just in case).
4. Start the NW server. It will generate a new log file.
5. Wait until the error will appear.
6. Run nsr_render_log ../nsr/logs/daemon.raw > .../daemon.txt and evaluate the output.
7. Place the relevant info in your next statement - do not dare to just copy the file here. You would also not read through ALL that stuff.
Some work to be done. Good luck ....
crazyrov
4 Operator
•
1.3K Posts
0
June 23rd, 2021 00:00
@tkrajeesh, nsrlcpd not running usually means that NetWorker is unable to get information about the auto changes on the tape library. Try to use the following commands to check if the NetWorker server is able to communicate with the tape library.
- inquire (the NetWorker services should be running)
- sjirdtag e.t.l
- sjisn e.t.l
Refer to this blog - https://nsrd.wordpress.com/tag/sjirdtag/ , this should help you move forward