Unsolved
7 Posts
0
553
July 28th, 2022 20:00
Networker service inactive after changing IP & hostname
We had clone a VM that already have networker mysql backup. After we change the IP & hostname and reboot the vm, the networker services shown inactive. Is there any missing step here that need to be done first so that the networker service is running fine?
No Events found!
bingo.1
2.4K Posts
0
July 29th, 2022 02:00
I do not think so. But what is the problem to de-install and re-install the NW client software. It is just a job which takes about 5-10 mins.
saifulamri
7 Posts
0
July 31st, 2022 19:00
is there any guide on this? as im not sure since its already setup during the deployment phase.
bingo.1
2.4K Posts
0
August 1st, 2022 00:00
saifulamri
7 Posts
0
August 1st, 2022 01:00
can share the link? i found one here: Dell EMC NetWorker Installation Guide v19.2 but it is for v19.2. is it still applicable for v19.4?
bingo.1
2.4K Posts
1
August 1st, 2022 03:00
https://www.dell.com/support/home/en-us/product-support/product/networker/docs
The most recent ones are for NW 19.7. But for the client software, the procure has not changed for years.