Unsolved
3 Posts
0
621
June 13th, 2020 18:00
Networker Disaster protection with RP4VM
Hi,
Is it possible following scenario:
- two separate sites with WAN links
- primary site has NW/VE in VMware, physical NW storage node with DD system and tape library system
- secondary site has physical VW storage node with DD system and tape library system
- NW 19.2.1 version
- RecoverPoint for VMs 5.2
Is it possible to protect NW/VE Server with RecoverPoint for VMs system to secondary site, so if there is Disaster on primary site, to simply perform RP NW/VE VM "failover" procedure and start NW/VE server on secondary site with same/different host name and different IP address?
Is this solution possible?
Can we perform restore of NW clients on secondary site after NW/VE failover there?
Thanks,
Danail
No Events found!
crazyrov
4 Operator
•
1.3K Posts
0
June 22nd, 2020 08:00
Well, NetWorker is on a OS or an appliance on a hypervisor. RP4VM could look at it as any other VM, So your solution should work. You mentioned you are using a Tape library, so how are you going to handle it ? I assume you have a physical storage node for it on the DR location. Also, the JB might be required to be reconfigured within NetWorker after the migration.