8 Posts
0
1060
January 12th, 2020 22:00
Networker CCR clone job autostart in a row?
Hi everybody,
We have different CCR clone jobs on Networker. I know how to auto start enable/disable manuelly. But I want to autostart one of the CCR job in a row. I mean when it finishes, it has to start immediately. Is it possible to arrange it like that?
No Events found!
crazyrov
4 Operator
•
1.3K Posts
0
January 13th, 2020 04:00
Ok, so there is an option in the workflow to change the interval of the scheduled start. The default value is 24 which means that work can run once a day. Making it 12 ensure that it runs twice in 24hrs. You could may be make the interval small enough say 1, so that when the workflow completes it gets started again within the next 1 hour.
syskemal
8 Posts
0
January 12th, 2020 23:00
@crazyrov To make it clear,
Lets assume that I have only one CCR job and it takes 10 hours. In Networker Manager, when I set the auto start enabled, I can set at least daily interval. I want to start it again automatically after it has just finished. I also started use Data Protection Advisor but it is a reporting tool, I don't know if I can send commands remotely from DPA.
crazyrov
4 Operator
•
1.3K Posts
0
January 12th, 2020 23:00
@syskemal, Please elaborate a little more, you request is not very clear.
Incase you are referring to different clone workflow starting as soon as the one workflow completes, then it is not possible with the standard configuration available in NetWorker. You might have to script this out.
syskemal
8 Posts
0
January 13th, 2020 05:00
That makes sense. I'll type the result here. Thank you.
syskemal
8 Posts
0
January 13th, 2020 23:00
@crazyrov It worked well. Thanks for your advice. After you replied to me I found the relative topic in the Networker Manager 18.1 Administration Guide which is https://www.dellemc.com/en-us/collaterals/unauth/technical-guides-support-information/products/data-protection/docu89893.pdf
at the page 249.