Networker backup failing

Question

my Networker backup is failing due with the following error logs. what could be the reasons ? suppressed 6011 bytes of output.12/7/2021 8:40:34 AM The save job for the save set 'MEDI:xxx' on the host 'netwrkextproxy.xxxx.local' has been completed.166682 1638837634 2 5 0 8068 6344 0 netwrksvr.xxxx.local savegrp NSR warning 65 Job %u with command '%s' for client %s exited with return code %d 4 5 6 160008 0 455 nsrmedisv.exe -LL -s netwrksvr.xxx.local -g MEDI_DAILY/MED_DAILY/backup/MEDI_DAILY -a '*policy action jobid=160006' -a '*policy name=MEDI_DAILY' -a '*policy workflow name=MEDI_DAILY' -a '*policy action name=backup' -y 'Mon Dec 13 23:59:59 GMT+0800 2021' -w 'Mon Dec 13 23:59:59 GMT+0800 2021' -m netwrkextproxy.xxxx.local -b EMR_MEDI_POOL -o '\'REQUESTED_LEVEL:level=full;\'' -l full -q -W 78 -N MEDI:MEDI MEDI:MEDI 12 28 netwrkextproxy.xxx.local 1 1 312/7/2021 8:40:34 AM Job 160008 host: netwrkextproxy.xxxx.local savepoint: MEDI:MEDI had ERROR indication(s) at completion12/7/2021 8:40:34 AM netwrkextproxy.xxxx.local:MEDI:MEDI failed.12/7/2021 8:40:34 AM MEDI_DAILY:netwrkextproxy.xxx.local:MEDI:MEDI See the file 'C:\Program Files\EMC NetWorker
sr\logs\policy\MEDI_DAILY\MEDI_DAILY\backup_160006_logs\160008.log' for command output.12/7/2021 8:40:34 AM Client 'netwrkextproxy.xxx.local' is being skipped because no savesets of this client have been backed up as part of the backup action.

bingo.1 · Answer

Sorry, but with this minimal fraction of information you will most likely not have any success at all. Just from the partial save set string 'MEDI' I would guess that this is a backup of a Meditech database using the appropriate NW module. If so, it is obvious that only such users in the USA would be able to help you. On the other hand, you could be lucky if this is a 'standard' general error. In this case, it would be good that you read the error log properly and act as suggested:   -  First I would use nsr_render_log to get a proper output where all variables will be filled with meaningful values. This makes the message easier to understand. See the Command Line Reference manual for details.   -  Then I would - as suggested - open the file C:\Program Files\EMC NetWorker
sr\logs\policy\MEDI_DAILY\MEDI_DAILY\backup_160006_logs\160008.log for the output of this specific program. It may show the reason already.   Now the most important issue: Before you continue with a (hopefully) new installation, I urge you to move your NetWorker software off the system drive C: !!! - As usual, because it must exist, the installation program suggests the default path but with respect to safety, security and reliability this is the worst choice. Please use a dedicated volume for your NW installation.   In case the logfile information will not be able to help you, please state more information about your environment.

Chazerqc · Answer

Hi ,  vm backup if yes restart the vproxy which processed the job

PrinceAijaz · Answer

This is NetWorker Module for Meditech backup failure. You will need to go NMMEDI proxy(netwrkextproxy.xxx.local) and provide the correct log. From the face of it is ISB backup failure.

Emrose0702 · Answer

suppressed 17306 bytes of output. 166682 1717854904 2 5 0 6524 336 0 emc-networker.icmcctscl.in savegrp NSR warning 65 Job %u with command '%s' for client %s exited with return code %d 4 5 7 2624348 0 511 nsrnmmsv -LL -s emc-networker.icmcctscl.in -g ICMCC-HyperV/HyperV/backup/ICMCC-HyperV -a '*policy action jobid=2624346' -a '*policy name=ICMCC-HyperV' -a '*policy workflow name=HyperV' -a '*policy action name=backup' -y 'Mon Jul 08 23:59:59 GMT+0530 2024' -w 'Mon Jul 08 23:59:59 GMT+0530 2024' -m hyperv_cluster.ICMCCTSCL.IN -z -a DIRECT_ CCESS=Yes -b datadomain -o '\'RENAMED_DIRECTORIES:index_lookup=on;REQUESTED_LEVEL:level=incr;\'' -l incr -q -W 78 -N pseudo_saveset 'APPLICATIONS:\Microsoft Hyper-V\Test 12 27 hyperv_cluster.ICMCCTSCL.IN 1 1 1 6/8/2024 7:25:04 PM Job 2624348 host: hyperv_cluster.ICMCCTSCL.IN savepoint: pseudo_saveset had ERROR indication(s) at completion 6/8/2024 7:25:04 PM hyperv_cluster.ICMCCTSCL.IN:pseudo_saveset failed. 6/8/2024 7:25:04 PM ICMCC-HyperV:hyperv_cluster.ICMCCTSCL.IN:pseudo_saveset See the file 'C:\Program Files\EMC NetWorker
sr\logs\policy\ICMCC-HyperV\HyperV\backup_2624346_logs\2624348.log' for command output. 6/8/2024 7:25:04 PM Client 'hyperv_cluster.ICMCCTSCL.IN' is being skipped because no savesets of this client have been backed up as part of the backup action. 6/8/2024 7:25:09 PM Action backup traditional 'backup' with job id 2624346 is exiting with status 'failed', exit code 1

NetWorker

Networker backup failing

Was this post helpful?