This post is more than 5 years old
2 Posts
0
1443
August 8th, 2015 11:00
library quantium scalar i80
hi all
i have an issue with my library quantuim scalar i80. when i do the backup they are an error with the tape:
moving: read open error
see below the log deamon.raw
0 1439049175 1 5 0 2928 2480 0 ci08svbkp002 nsrmmgd NSR notice 5 %s %s 2 0 24 08/08/15 15:52:55.324920 0 83 lcpd daemon 1 did not start at host `ci08svbkp003' as requested. error = 0, pid = 0
38758 1439049265 0 0 0 2088 4040 0 ci08svbkp002 nsrd NSR info 9 %s %s: %s 3 0 5 media 0 7 warning 0 36 rd=ci08svrdbdwh1:/dev/nst1 opening:
38758 1439049265 0 0 0 2088 4040 0 ci08svbkp002 nsrd NSR info 9 %s %s: %s 3 0 5 media 0 7 warning 0 127 rd=ci08svrdbdwh1:/dev/nst1 moving: read open error: a system error occurred - see errno for more information (drive status is )
38758 1439049265 0 0 0 2088 4040 0 ci08svbkp002 nsrd NSR info 9 %s %s: %s 3 0 5 media 0 7 warning 0 0
7224 1439049266 1 5 0 2088 4040 0 ci08svbkp002 nsrd NSR notice 5 %s %s 2 0 44 [Jukebox `QUANTUM@11.2.1', operation # 177]. 0 92 read open error: a system error occurred - see errno for more information (drive status is )
7224 1439049266 1 5 0 2088 4040 0 ci08svbkp002 nsrd NSR notice 5 %s %s 2 0 44 [Jukebox `QUANTUM@11.2.1', operation # 177]. 0 92 read open error: a system error occurred - see errno for more information (drive status is )
12361 1439049269 1 5 0 2088 4040 0 ci08svbkp002 nsrd NSR notice 27 %s Finished with status: %s 2 0 44 [Jukebox `QUANTUM@11.2.1', operation # 177]. 0 6 failed
89651 1439049291 4 2 12 3520 4040 0 ci08svbkp002 nsrd RPC severe 85 Unable to connect with nsrexecd on host '%s' for querying storage node capability: %s 2 12 12 ci08svbkp003 49 159 80720 9 %s%s - %s 3 24 0 11 23 352:Remote system error 11 97 Aucune connexion n’a pu être établie car l’ordinateur cible l’a expressément refusée.
ci08svbkp002 and ci08svbkp003 are storage node
thank for help
Raja_Bala
37 Posts
0
August 10th, 2015 18:00
Please check if nsrlcpd service is running in storage node. if not try to stop and start the nsrexecd service and see whether nsrlcp service is running after some time.
expert_baby
2 Posts
0
August 11th, 2015 11:00
hello Raja
i don't see nsrlcpd service on windows 2008 service list manager.
how can found it?
i have restarted nsrexecd
on detail i have two activate storage node, ci08svbkp002 and ci08svrdbdwh1 for labrary Quantuim i80 and 4 starage node for the labrary STK where all working finelly.
the order of tape drive are: for STK:
For Quantuim:
r=ci08svrdbdwh1:/dev/nst1 work finelly but now i can't see nst2 please help
Raja_Bala
37 Posts
0
August 11th, 2015 17:00
Please run inquire command in storage node and see whether you are able to see nst2 device.