Unsolved
1 Message
0
403
August 10th, 2020 08:00
CLP/ELMS Registration Warning Message
I show the following message on Networker that I cannot clear:
Alert Message:
CLP/ELMS server for basic license information found the following: 'Can't establish connection to the license server. Flexlm error -15'. Please check the network communication between NetWorker Server and License Server. Make sure the license server daemon is running. Or be sure the license files on both hosts have the same port number.
Alert Time: Fri Jun 26 19:50:37 2020
Alert Priority: warning
Alert Category: registration
NetWorker 9.2.2.0.Build.396 Commercial Edition/20
No Events found!
bingo.1
2.4K Posts
0
August 10th, 2020 10:00
If you have a license problem, i guess you have asked earlier. So this is obviously 'only' a 'cosmetical' issue.
I cannot really help you with this issue as your post has too few information.
Actually, if you only have one NW server, it does not make sense to have the License Server SW installed at all. This is a redundant piece of software which might cause problems ... and you do not need it. Since version 9.2.2 NW is able to support the 'older' unmanaged licenses again. This means however, that you need to ask the licensing guys for the appropriate enablers and auth codes. You will receive then free of charge.
And do not forget to update to a more recent software version.