1 Rookie
•
3 Posts
0
364
March 6th, 2025 12:09
U2725QE, Dell Color Management, dual monitors
Trying to calibrate to SRGB - launch Dell color management software.
For the first screen this works, and the calibration colors stay on the left monitors, when we switch to monitor 2, and try to calibrate the calibration colors stay on the left mointor and not monitor 2 (the right one)
Also what profile should be applied in windows, - or does Dell color managment override all of these.
Thanks
No Events found!
DELL-Chris M
Community Manager
•
56.8K Posts
0
March 6th, 2025 13:19
That should work? For now, disconnect 1st, make 2nd only Primary. Then run DCM on it.
DCM User's Guide page 13 appears to show that you can choose from multiple color space (profiles). Use the same choice for both.
DELL-Chris M
Community Manager
•
56.8K Posts
0
March 6th, 2025 12:45
1st monitor = U2725QE
2nd monitor = ?
Are the two monitors daisy chained to each other? If yes, disconnect daisy chain. Connect BOTH monitors to a different video out port on the PC. Then retry the Dell Color Management on the second monitor.
9065b7d3
1 Rookie
•
3 Posts
0
March 6th, 2025 12:57
sorry 2nd monitor - is U2725QE - we bought both the same as wanted to make sure both had the same color.
They are connected individually through display port cables to separate slots on a geforce 4080
9065b7d3
1 Rookie
•
3 Posts
0
March 6th, 2025 17:44
Yes - that worked - also noticed the profiles are saved out too
C:\ProgramData\Portrait Displays\Dell Color Management\Calibration\DEL4362
and then the service tag of the monitor becomes the profile name.