Unsolved
1 Rookie
•
5 Posts
0
20
January 16th, 2025 23:50
ST2410, not working with adapter to Quadro M2000
I'm trying to install a Quadro M2000 video adapter for use with a Sell ST24100 monitor. The only display is the floating message, "No VGA Cable'. I'm plugged into the HDMI port on the monitor and adapter, but doesn't seem to see the port. Please, advise.
No Events found!
tfuller
1 Rookie
•
5 Posts
0
January 17th, 2025 00:04
Forgot to say that the MB is a Supermicro X8DTL-iF and works fine with my old Quadro FX 1800 with the VGA port. Couldn't find any video settings in the BIOS and there doesn't seen to be any "video" jumper.
tfuller
1 Rookie
•
5 Posts
0
January 17th, 2025 00:36
The driver is ST2410(analog) v1.0.0.0 f/11/2009 and appears to be the same as the supplies by the "DELL_ST2410-MONITOR_A00-00_R230160.exe"
tfuller
1 Rookie
•
5 Posts
0
January 17th, 2025 05:11
I found the input selection and manually assigned the port to HDMI and started a boot. The monitor put out this message, "There is no signal coming from your computer."
DELL-Chris M
Community Manager
•
56.8K Posts
0
January 20th, 2025 21:01
The 9 year old Nvidia Quadro M2000 has four DP 1.4a video out ports.
The 14 year old ST2410 has the following video in ports = DVI/HDMI/VGA
You will simply have to test retail DP to HDMI adapters in hopes of finding one that works.
tfuller
1 Rookie
•
5 Posts
0
January 22nd, 2025 22:46
Sorry, wasn't more accurate. The cable I'm using is DP on one end and HDMI on the other. BTW - still doen't work.