Unsolved
This post is more than 5 years old
7 Posts
0
1278
April 26th, 2012 03:00
what is the best practice to migrate HyperV cluster volumes from equallogic iSCSI boxes to EMC VNX?
I'm looking into the best ways to migrate some MS 2008 hyperV CSV's from an existing Gbit iSCSI based equallogic solution onto a unified VNX5500 with virtual pool. the plan is to go to 10 Gbit FCoE along the way. What are the commonly used migration technologies in this case?
thx,
Geert Swillens
EMC TC
No Events found!
duckew
2 Intern
•
126 Posts
0
April 26th, 2012 04:00
Geert,
These are not a exact match to what you are looking for but its a start. I search both the ECN and Powerlink and these are what i found on Hyper-v migration to VNX arrays.
Using VNXe System with Microsoft Hyper-V
Describes how to set up a host to use Windows Hyper-V datastores on a VNXe system.
http://powerlink.emc.com/km/live1/en_US/Offering_Technical/Technical_Documentation/300-010-552.pdf?mtcs=ZXZlbnRUeXBlPUttQ2xpY2tTZWFyY2hSZXN1bHRzRXZlbnQsZG9jdW1lbnRJZD0wOTAxNDA2NjgwNjRmNWFhLGRhdGFTb3VyY2U9RENUTV9lbl9VU18w
Microsoft Windows 2008 R2 Hyper-V on EMC VNXe Series Deployment Guide
This document provides an overview of the deployment options for Microsoft Hyper-V with EMC VNXe series storage arrays developed by the EMC Unified Storage Solutions group.
https://community.emc.com/docs/DOC-11615
geertswillens
7 Posts
0
April 27th, 2012 07:00
Thx William,
Looks quite good already, I’m guessing there will be principally no difference between VNXe and VNX as a migration target.
Regards,
Geert