Unsolved
This post is more than 5 years old
20 Posts
0
1496
December 7th, 2011 01:00
VNX SCOM PACK and VNX Gateway Dial Home
Customer would like to add the VNX arrays to SCOM monitoring. Looking at Release notes – “EMC Management Pack for System Center" it requires a new template to be applied that will contact the VNX monitoring station with alerts.
We are currently using a dial home template that enables the VNX to dial home via the ESRS G/W. Can we use two templates? e.g. when we get an alert it will dial home via the ESRS G/W and alert SCOM.
Thanks
Mike
No Events found!
LouisLu
161 Posts
0
December 7th, 2011 02:00
Generally speaking, ESRS is strong enough. But for call-home template file, I remenber there is a site in powerlink to get help, like CLARiiON/VNX -> Service Tools.