Unsolved
This post is more than 5 years old
28 Posts
0
2422
May 18th, 2012 02:00
SMI-S provider with SCVMM 2012
hi,
i am buiding System center 2012 in lab and when i add storage in SCVMM 2012, there was an error, anyone know why i got this? how can i fix this? thanks.
storage: VNX
Solution ENabler is the latest version. (SMI-S)
the run as account is admin
password: 1#Password
regards,
Ike
thank you
No Events found!
Tx1_f906d5
21 Posts
0
May 18th, 2012 06:00
Ike, Do you have a Windows Firewall port exception for port 5988 on server R810-EX-SRV03.test.local? Or simply have the Windows Firewall down?
This error would seem to indicate that the storage management service on the SCVMM 2012 host was unable to connect to that port, and that would generally happen if the Firewall is up on that server. Windows Firewall would, by default, disallow any connections to most unknown port targets.
Aikemu
28 Posts
0
May 20th, 2012 19:00
the windows firewall already turned off. so i dont think that is firewall issue..
Jingyi1
2 Intern
•
199 Posts
0
May 20th, 2012 20:00
There is a CLI utility to test your SMI-S provider. I'd suggest you to test your SMI-S provider first to see if it works and can see the VNX array. You can go to SMI support documents on Powerlink and find more information on installation and configuration of SMI-S document.
Aikemu
28 Posts
0
May 27th, 2012 20:00
I have successfully added the provider with storage guys help, but when i log into SCVMM, there is another problem, i cannot add luns, and i configured the classifications and pools but it seems not apply to system, error message and setup screen attatched.
anyone know why? thanks.
Aikemu
28 Posts
0
May 27th, 2012 22:00
it is odd but the issue has been resolved by itself...
or it will take some time to refresh or sync something..