Unsolved
This post is more than 5 years old
87 Posts
0
3052
February 4th, 2013 09:00
PP, VNX, WIN2012 and ODX support
Hi,
what do we need to get our VNX up and running to our new hyper-v 2012 cluster with ODX enabled.
I've read something about pp 5.7, anyone any idea when this will be available.
Regards,
John Grinwis
No Events found!
Maliboo74
89 Posts
0
February 4th, 2013 09:00
Hello,
The estimated release date for PowerPath 5.7 for Windows is the end of February.
DaGrin
87 Posts
0
February 5th, 2013 00:00
So with pp 5.7 we're getting support for windows 2012 with hyper-v?
Do we need a new flare code to support ODX or does the current flare code already support ODX.
Regards,
John Grinwis
RafaelNovo
92 Posts
0
February 5th, 2013 04:00
ODX will be supported with next VNX software release.
Spitz1
1 Message
0
April 17th, 2013 23:00
Can you tell in which version number/patch?
RafaelNovo
92 Posts
0
April 20th, 2013 04:00
Planned for MR1 SP1, stay tunned.
sddc_guy
159 Posts
0
May 6th, 2013 16:00
Assaf, also make sure to read current KB´s on ODX
Offloaded Data Transfers fail on a computer that is running Windows 8 or Windows Server 2012
Virtual machine enters a paused state or a CSV volume goes offline when you try to create a backup of the virtual machin…
Read the articles Carefully.
We do not recommend that for Production Environments
If you want to obtain ODX on your VNX Array, you need to get an Enabler for you VNX. Contact EMC Rep for Details :
You need to have an RPQ to get the enabler Code. Refer to Primus case - emc317752:
http://knowledgebase.emc.com/emcice/documentDisplay.do;jsessionid=7A61152D720ED1C2D6DCED3686ACF2B5?docType=1006&clusterName=DefaultCluster&resultType=5002&groupId=1&page=&docProp=$solution_id&docPropValue=emc317752&passedTitle=null