Poweredge R320 reboot Problem

Hello dear Community,

 

I have the following Problem, if i do an reboot (warm reboot) for my Server over Windows always it gets Stuck at the Windows boot screen \/

 

If i do an cold start (Power off and on) the problem not appears and Windows is starting normally.

 

System: Win10 Pro (Newest Version),Intel® Xeon® Prozessor E5-2470 v2 ,3x 8GB RAM ,4x 1TB SAS from DELL

Server Firmware Stuff is also the newest aviable for the Poweredge R320

 

I tested following fixes:

-Installed all Drivers over Snappy Driver Installer

-Reinstalled Win10 serval times,

-RAM isn't the Problem i checked it,

-i even pulled out the HDD (with the Win10 copy on it) and put it in my other R320 and there is the same Problem,

-Linux just warmreboots fine...

-BIOS Settings reset...

-I tryed the HDD connection over SATA (bypass RC) and Raid Controller 

 

I checked the Protocol:

Always if the freeze happens there is an "CPU 1 machine check error detected." (CPU0704: CPU 1 machine check error detected.)

The CPU is just fine ,i can say it safe because i tried other server

 

Hopefully somebody has some Ideas.

 

Greetings DrKrieger