Unsolved
This post is more than 5 years old
11 Posts
0
6234
February 8th, 2012 11:00
Hyper-V cluster on VNXe3100 iSCSI
Hi all,
Could you help me out, situation:
Two servers connected via iSCSI to a VNXe3100. on the servers Hyper-V Windows 2008 R2 and cluster, with quorum disk on VNX.
MPIO is enabled/installen and still the VM will crach after a Storage Processor reboot.
All is connected according the VNXe configuration guide for Hyper-V cluster.
Has anyone run into this problem before?
Cheers!
No Events found!
duckew
2 Intern
•
126 Posts
0
February 8th, 2012 11:00
Mike,
Unfortunitly I have not done a Install with VNXe and Microsoft Hyper-V
but I did find this document,Maybe this will help you
EMC VNXe series
Using a VNXe system with Microsoft Windows Hyper-V
http://powerlink.emc.com/km/live1/en_US/Offering_Technical/Technical_Documentation/300-010-552.pdf?mtcs=ZXZlbnRUeXBlPUttQ2xpY2tDb250ZW50RXZlbnQsZG9jdW1lbnRJZD0wOTAxNDA2NjgwNWQ1MzFmLG5hdmVOb2RlPVNvZndhcmVEb3dubG9hZHMtMg__
348pqtzq3811637
11 Posts
0
February 8th, 2012 12:00
Hi Mike,
I have heard similar situation with VNXe and Hyper-V. I have contacted with our colleagues to see how solved the problem.
Regards
Francisco
348pqtzq3811637
11 Posts
0
February 8th, 2012 13:00
Hi Mike
I have found this Primus:
How to configure Windows multipathing on a VNXe
VNXe3100/3300 failover does not work correctly in multipath environments unless specific settings are configured. If the Windows settings are not configured correctly, VNXe storage resources only permit Read-Only access if a system storage processor (SP) goes down.
Please check the EMC solution emc269809 to follow the steps and solve the issue.
Regards.
Francisco
Mich
86 Posts
0
February 8th, 2012 17:00
I have emailed the author of this primus as there are a few steps missing in the setup of the MS iSCSI initiator.
Specifically, he was missing out on configuring the correct source initiator for each subnet which needs to be set in the MS iSCSI initiator Advanced Tab. See page 148 for W2K3 and W2K8 and page 154 for Windows 2008 R2 of the "EMC Host Connectivity Guide for Windows" available on http://powerlink.emc.com for detailed instructions.
Mad_Mike1
11 Posts
0
February 9th, 2012 01:00
Hi Mich, William and Francisco, thanks for all your help, i think we have this one solved!
Great job!
Forsakensa
2 Posts
0
February 19th, 2012 19:00
Hi Mike, I am having the same issue. What was the solution? I am unable to find EMC269809 anywhere in the powerlink website. Please advise. Thanks Stephen
Mad_Mike1
11 Posts
0
February 21st, 2012 09:00
Hi Forsakensa,
The solution for this customer next to all the imput above,
We Created two iSCSI servers per SP on the VNX, so we moved away from 1 iSCSI server with 2 IP adresses per SP.
The Quorum disk was totaly reformated and with this we recreated the cluster information.
This did the trick ;-)
Cheers
Forsakensa
2 Posts
0
February 21st, 2012 09:00
Hi Mike
When you say you created two iSCSI servers per SP. How do you associate the storage with all the iSCSi servers. From my side when creating a lun you can only pick I storage server for that lun, so how do you associate with all 4 . I am a little confused here, even though the concept you mentioned sounds correct.
Regards,
Stephen
AvishayP
4 Posts
0
May 17th, 2012 07:00
i am looking for solusion to this problem :
The VNXe failover period seems to be long enough to disconnect disks on hosts. During tests in the lab it has been identified to be a problem in the cluster environment rather than in standalone setups. Currently (March 12, 2012) there is no resolution or workaround available to resolve this problem and there is no estimated time frame for a fix for this issue to be made available. Product Management has been informed about this and work is still in progress.
Currently (April 13, 2012), this is a problem with VNXe handling of Persistent Reservations in Windows Cluster environment. This affects all applications set up with Microsoft Cluster Services (MSCS), for example - Hyper-V, SQL, File Sharing,and the like.
This does not disrrupt the working of Windows Cluster with VNXe. Many customers have been using the VNXe with this setup. The only caution is to not reboot the storage processors on a VNXe (as part of troubleshooting or for upgrade activity). The failover of services will cause iSCSI storage to disconnect.
AvishayP
4 Posts
0
May 17th, 2012 07:00
does anyone know how to get EMC269809 i can't find it anywhere .
duckew
2 Intern
•
126 Posts
0
May 17th, 2012 07:00
Is that a primus solution you are looking for..
Giuve me your E-mail adress and I will send it to you
duckew
2 Intern
•
126 Posts
0
May 17th, 2012 07:00
Avishay,
I would Call CS and see if you can contact the autor to the Primus post.
That would be the best place to start
DynaDin
138 Posts
0
August 26th, 2013 13:00
The above mentioned problem (bug) has been permanently fixed in OE version MR4 (2.4.0.20932) and later.
rowdybunch
1 Rookie
•
45 Posts
0
September 2nd, 2015 06:00
Did you ever get a response to your question. I am also wondering the same thing.