Unsolved
This post is more than 5 years old
3 Posts
0
1511
December 5th, 2017 04:00
Precision M6700 AMD Catalyst Control Center
Hi,
I made a change in the AMD catalyst Control Center that has modified my refresh rate to the point where i cannot navigate the desktop. Is system restore the only way to recover from this? I made a change regarding the Hydra Settings and it all went south. I performed a restore and after boot it was good. i shut the node down and rebooted after the weekend and the failed screen came back.
Any suggestions,
Safe mode Bruce
No Events found!
DELL-Jesse L
Moderator
•
17.7K Posts
0
December 5th, 2017 06:00
LAZURUZ,
Uninstall the video card drivers and catalyst software, reboot the computer and reinstall them back into the computer.
Lazuruz
3 Posts
0
December 5th, 2017 08:00
Jesse,
That worked! Yay!!
thx J
ieee488
4 Operator
•
11.1K Posts
0
December 5th, 2017 12:00
You should mark this as solved to help others with the same problem.
Lazuruz
3 Posts
0
December 5th, 2017 13:00
I cant seem to find a selection to do so?