Unsolved
This post is more than 5 years old
68 Posts
0
6343
November 14th, 2006 13:00
Need manual for 603NY 2nd hard drive module
Any idea where to download the manual / docs for the 603NY 2nd hdd module?
I've been searching the site and the manuals section for some time without luck :(
I ask because it's not obvious which way the drive goes in and thus which way the cable connects. If the drive goes in label up, then the cable doesn't quite allow the drive to fit in the space. Yet if you turn the drive upside down, it fits fine in the space when connected.
It's too bad there's no clear indication or any filled holes in the cable to make sure you put it in the right way :(
Message Edited by EatAtTheDeli on 11-14-200610:48 AM
No Events found!
fudgieguys
1.3K Posts
0
November 14th, 2006 20:00
jdrou
29 Posts
0
November 21st, 2006 00:00
Indeed, they put the keying on the drive for a reason; why not use a keyed cable? Anyway, in the 2nd drive module for the C-series the drive goes in with the circuit board up. Note that it doesn't seem to work with an unpartitioned drive; it won't be detected when hot-plugging it and it will show "unrecognized module in media bay" when you boot. Partition the drive in another system or in a USB case and it will work.