Unsolved
This post is more than 5 years old
2 Posts
0
899
December 1st, 2017 10:00
OptiPlex 7010
7010 will not boot with a monitor attached via DP, boots fine with same monitor via VGA ?
No Events found!
Unsolved
This post is more than 5 years old
2 Posts
0
899
December 1st, 2017 10:00
7010 will not boot with a monitor attached via DP, boots fine with same monitor via VGA ?
Top
DELL-Jesse L
Moderator
•
17.6K Posts
0
December 1st, 2017 11:00
SCLOUSE,
Make sure DP is selected on the monitor's on-screen-display (OSD) as the input source.
sclouse
2 Posts
0
December 1st, 2017 12:00
monitor is set to DP in the (OSD) if I use the DP cable and VGA with that cable, it is a new Dell 43",
PC will not boot up, no dell boot logo, no drive activity when monitor is connected via DP cable in either DP port, but PC will boot when connected to monitor via VGA cable,
PC will boot with no display cable connected and if I plug in monitor via DP cable after booting, all is good