Unsolved
This post is more than 5 years old
2 Intern
•
136 Posts
0
2135
November 24th, 2017 18:00
Do I need a driver for this esata multiplier card witb 9020 SFF?
Hi,
I have taken out the esate multiplier card out of my Win 10 x64 Dell T7500 to place it ib the Win 10 x64 9020 SFF
I have forgotten whether I needed any drivers for it when I put it in the T7500.
It is a Addonics ADSA3GPX1-2EM
Y
Thanks
oz
No Events found!
speedstep
9 Legend
•
47K Posts
1
November 27th, 2017 07:00
http://www.addonics.com/products/ad2sa3gpx1.php
Yes this requires a mass Storage driver.
This is not a dell product and Not supported here.
Applies to: AD2SA3GPX1, ADSA3GPX1-2E, ADEXC34R5-2E
SiI3132r5 driver for all Windows 32-bit and 64-bit operating systems.
Applies to: AD2SA3GPX1, ADSA3GPX1-2E, ADEXC34R5-2E
SiI3132r5 SATARaid5 Management Utility for all Windows 32-bit and 64-bit operating systems.
Applies to: ADSA3GPX1-E, ADSA3GPX1-2EM
SiI3132b non-RAID driver for all Windows 32-bit and 64-bit operating systems. To use this driver on the ADSA3GPX8-ML and ADSA3GPX8-4E, set jumper on controller to "Disable BIOS".
ozstar
2 Intern
•
136 Posts
0
November 27th, 2017 22:00
Thank you for your help.
I do have that driver file but not sure what to do with it as there is no .exe and the card does not show up in Dev Mgr to install driver.
Is here anything in Bios I need to change for this 9020 as it works beautifully in the T7500.
Thanks again
speedstep
9 Legend
•
47K Posts
1
December 1st, 2017 08:00
All of those files are .ZIP files They must be UN Zipped. The other "ISSUES" have to do with SECURE BOOT must be OFF and Legacy CSM ON with OPTION ROMS ON. Even then the issue may be PCI-E version 3.0 bus is NOT COMPATIBLE with PCI-E version 1.0 and 2.0 cards.
This is not a dell product and not supported here.
ozstar
2 Intern
•
136 Posts
0
December 1st, 2017 20:00
Thanks. I have checked those.
I noticed in the T7500 this is in Storage controllers in Dev Mgr.
Dell SAS 6/iR Integrated Workstation Controller
It is not in the 9020 where I am trying to relocate the card.
How did that get into the T7500? Do I need to also have it in the 9020?
ozstar
2 Intern
•
136 Posts
0
December 6th, 2017 14:00
So after many many days of going between Addonics Support, it seems their card is PCI-E 2 which if the mobo bus is 3, then that is why it never shows up.
Does Dell recommend a Port Multiplier for the 9020?