Unsolved
This post is more than 5 years old
4 Posts
0
2992
March 20th, 2004 11:00
Dimension 4300 and Albatron FX5700P
The card works fine but not quite. I always get a blue screen every time i start up
my system right after the xp loading screen appears.(before the log on screen)
the next time my system starts i get the option to get into safe mode or normal.
I choose normal boot and the system works like a charm.
BIOS version is A06 and i tried the drivers of the card AND the latest nvidia drivers.
i got the same result.
Any Ideas what might be wrong?
Thank you
Yiannis
No Events found!
shunney
1.4K Posts
0
March 20th, 2004 19:00
Download and install driver cleaner
http://www.driverheaven.net/cleaner/
Uninstall your current display drivers, reboot into safe mode, cancel the driver wizard, run cab cleaner then driver cleaner, clean Ati and Nvidia , reboot normal mode, cancel the driver wizard and install the latest driver...
Read the driver cleaner readme for more detailed instructions, but its simple enough...
See if that helps
Good luck
Message Edited by shunney on 03-20-2004 09:21 PM
YiannisK
4 Posts
0
March 23rd, 2004 19:00
ok fixed.. i'm not particularly fond of installing software to remove software so i uninstalled through add\remove rebooted to VGA mode installed the latest nvidia drivers and everything works fine since then.
Thanks a lot anyway.
Yiannis K.