This post is more than 5 years old
6 Posts
0
1348
July 22nd, 2016 19:00
m17xr3 with quadro k4000m gpu wont work with NVidia 3d vision
my computer that I bought on ebay that said it was 3d vision ready hasn't worked with NVidia 3d vision yet but has worked with my 3dtv with 3dtv play please help me my driver version is 368.39 and I have 3d vision glasses kit and extra pair 1st generation of these, so I have 3d vision glasses kit 1 and with 3d ir imiter, I don't have stereoscopic 3d setup as an option in NVidia control panel but my screen is 120hz, please help its been a year or more thank you -Dylan dawley
No Events found!
beamermt79
4 Operator
•
2.3K Posts
0
July 23rd, 2016 14:00
Hello! The Alienware M17X R3 I dont think ever came with Quadro graphics. You could try installing the 3d Controller driver in the support page here, but its possible using the Quadro card is causing a conflict somewhere with the computer itself. Someone else may have thoughts on it too.
DELL-Chris M
Community Manager
•
56.9K Posts
0
July 23rd, 2016 15:00
Agreed. We never tested a Quadro GPU in any of the Alienware Laptops. The Quadro used different drivers, not the Nvidia consumer gaming driver. I doubt that the Nvidia consumer gaming driver would install correctly on the Quadro GPU. In the 2011 M17x-R3, we validated the following Nvidia GPU =
RFYN9 N12E-GTX2 GeForce GTX580m (Video card 3MF8R + Thermal Assembly V1K2G)
8H4G6 N12E-GS GeForce GTX560m (Video card YT99J + Thermal Assembly J9H7X)
87XRJ N11E-GS GeForce GTX460m (Video card VDV04 + Thermal Assembly J9H7X)
dylandawley
6 Posts
0
July 23rd, 2016 22:00
thank you for your response I understand now that it wont work, again thank you