Unsolved
This post is more than 5 years old
12 Posts
0
5890
November 13th, 2017 02:00
does anyone know what the difference in elpida memory 9-10 A0 and 9-10 B0 is
upgrading ram to 2 GB sticks wanted to know if 9-10 A0 and 9-10 B0 can be installed together
No Events found!
speedstep
9 Legend
•
47K Posts
0
November 13th, 2017 05:00
"9-10 A0 and 9-10 B0" are not part numbers or complete specifications. They have nothing whatsoever to do with ANY vendor specifications AND this is not a Dell Support Question.
fogger803
12 Posts
0
November 13th, 2017 12:00
I guess i should have made it more clear with my Question ..But it is a Dell support Question as my Aurora came with Elpida 1GB 1Rx8 PC3-10600U-8 -10-A0 DDR3 Desktop Memory Ram EBJ21UE8BDF0-DJ-F and i want to know if Ram like Elpida 2GB 2Rx8 PC3-10600U -9-10 B0 DDR3 Desktop Memory Ram EBJ21UE8BDF0-DJ-F would be compatible with my System..Sorry for the Confusion on my Part..But i think i figured it out as i Think the B0 is Because it is 2Rx8 instead of 1Rx8
speedstep
9 Legend
•
47K Posts
0
November 14th, 2017 06:00
Mixing Ranks, density, speed This is not supported. Depending on dual or Tri channel they must be in sets of 2 or 3 or 6
Micron Purchased ELPIDA in 2013
Micron Technology, Inc. - About the Elpida Acquisition
EBJ21UE8BDF0-DJ-F Appears to be a Generic Marking
4GB (2X2GB)
ELPIDA EBJ21UE8BDF0-DJ-F 2Rx8 PC3-10600U-9-10-B0 Desktop RAM 1333MHz
fogger803
12 Posts
0
November 14th, 2017 15:00
Thanks for the Info..I am going with 6 sticks of
ELPIDA DDR3 2GB 1RX8 PC3-10600U-9-10-A0...Everything is the same as the original except it is the 2 GB Module