Aurora R6 PSU whine - options?

800GY, huh. It needs the high-amp cord, C19 type > Alienware Area 51 Power Cord

The length is approx. 8 9/16" / 217mm, measure yours & decide. The 850 / 1500 have the same front panel & pinout, this assures that one Area-51 case harness can accommodate both chassis, from there, Aurora has to be compatible > if it can use the 850 N1WJD it can use 800GY, but can the length and height fit, you'll have to measure or just try it to see. I've got the 850 & 1500 but can't get to them to measure their height to see if they're the same, I think they are but can't remember; most PSUs tend to be 86mm high = 3.38 inches (~3 3/8). Maybe you'd measure the height of your 850 then message the vendor you plan to buy from, can they measure theirs. Personally I'd try the EVGA 850 G3, with a shorter chassis, however, if you have the Delta 850's custom case harness for Aurora, 800GY might be worth the try, because it has re-sale value if it doesn't fit or is too long and what not (sell it & try an aftermarket type like G3). Dark Power Pro 11 850w or 1000w platinum is another worth looking at (make sure it comes the black cables). Let us know if it works

The 850W N1WJD  Delta power supply is about 7.5'' / 190mm long, so there is a inch difference. By looking at the Aurora R6 internals I do not see how it can fit w/o changing/cutting the PSU holder. So it is no-go

this owner installed Corsair RM1000 or 1000x, you should ask how that's going Does Aurora r5 support i7-7700k