Dell PowerVault MD3400 - Virtual Disk Not on Preferred Path and Storage array in recovery mode

I have three servers connected to an MD3400 SAN server via SAS ports. The MD3400 is configured with RAID 5 using 12 disk slots, each with a 10TB capacity. Unfortunately, three disks in slots 4, 6, and 9 failed. After replacing the faulty disks and reconfiguring the system, I encountered two warning messages: "Virtual Disk Not on Preferred Path" and "Storage Array in Recovery Mode."

I would greatly appreciate any support or guidance on how to resolve these issues. If needed, I can provide log files to facilitate troubleshooting.

Thank you in advance for your help!