Unsolved
1 Rookie
•
2 Posts
0
22
February 6th, 2026 07:58
Inspiron 5680 Nouveau SSD
Bonjour,
je souhaiterais installer un SAMSUNG SSD Interne 9100 Pro NVME 2.0 PCIe 5.0 x4, capacité 4To, vitesse de lecture jusqu'à 14800 Mo/s. J'aimerais savoir si c'est compatible. Je vois bien un branchement M.2 SSD connector et un PCI-Express X4 slot sur la carte mère. Mais je ne sais pas si c'est compatible ni lequel je dois utiliser. Quelqu'un a-t-il la réponse svp ?
DoRedfish
1 Rookie
•
2 Posts
0
February 7th, 2026 17:16
@ ejn63 Merci pour votre réponse. Y'aurait-il un moyen de faire en sorte que ce SSD pris en charge ? faut-il changer le CPU par exemple ?
ejn63
10 Elder
•
30.8K Posts
0
February 7th, 2026 18:39
The CPU has nothing to do with SSD compatibility -- the SSD will work with the system. It just will not run at full speed due to the relatively old hardware in the system.
"
Thank you for your reply. Is there any way to make this SSD compatible? Would I need to change the CPU, for example?:"ejn63
10 Elder
•
30.8K Posts
0
February 6th, 2026 13:43
The system will take that SSD but run it at reduced speed - it does not support PCIe 5 speeds. While there are PCIe cards that will take the SSD, if your plan is to use it as a boot drive you may run into issues.
"I would like to install a Samsung 9100 Pro NVMe 2.0 PCIe 5.0 x4 internal SSD with a capacity of 4TB and a read speed of up to 14800 MB/s. I'd like to know if it's compatible. I see both an M.2 SSD connector and a PCI-Express x4 slot on the motherboard. However, I'm not sure if it's compatible or which one I should use. Does anyone have the answer, please?"