1 Rookie
•
2 Posts
0
1409
December 8th, 2023 17:18
Inspiron 27 7720 All-in-One, 3rd party stand?
Inspiron 27 7720 All-in-One
My old computer had one foot for the stand right in the middle which was nice as it allowed the computer to be placed in the back corner of the desk. This 7720 has the two feet at each end of the monitor which is resulting in a lot of dead space on my desk. What are some stands that I can use?
No Events found!
RoHe
10 Elder
•
45.2K Posts
0
December 9th, 2023 21:42
Look at the pic I posted of back of your PC. There's no latch mechanism at center of the PC's back panel to mount that VESA adapter.
Looks like there are 2 alternative stands for your PC model, Y and Isosceles, but they both use the latches at the corners of the panel. So they may not help your situation.
You want to be cautious about jerry-rigging a center stand for a PC with 27" screen that weighs between ~15.2 and ~15.8 lb (non-touch screen vs touch), and is likely heavier than a stand-alone monitor.
You don't want to risk the PC toppling over and cracking that big screen or worse. That's probably why Dell uses corner mounts, aside from having all the PC's ports in the center at the bottom...
RoHe
10 Elder
•
45.2K Posts
0
December 8th, 2023 21:09
Problem is, this PC model has all its ports right smack in the middle of the lower back panel. So a center mounted stand, assuming one was available, would likely block access to the ports. And there's no option for a VESA mount stand in the middle of the back panel.
(edited)
joelmilberg
1 Rookie
•
2 Posts
0
December 9th, 2023 16:42
How about something like this? Has anyone tried to use this for a 27 inch 7720?
Amazon.com: HumanCentric VESA Mount Adapter Compatible with Dell Monitors SE2416HX, SE2717HX, SE2717HR, SE2717H, S2216M, S2216H, SE2716H, SE2216H, SE2417HG, SE2416H, S2216H, and More : Electronics
dell jim
1 Rookie
•
1 Message
0
June 24th, 2025 19:46
@RoHe do you know where I can find the alternative stand