Unsolved
This post is more than 5 years old
1 Message
0
1955
October 17th, 2017 13:00
Failing at Capturing Windows Partition 0%
I'm trying to capture a 1703 UEFI image. I used Hyper-V to create the image. Everything runs fine until it reboots into the WinPE environment and tries to capture the Windows partition. It then gets stuck at 0% and never progresses. I can't get to any logs by pressing F8, it just hangs there forever. I'm stumped, any ideas?
No Events found!
ed_goldberg
43 Posts
0
October 17th, 2017 13:00
Please compare your settings in the session with the settings in the tutorial through the link listed below.
(edited)
minnesberg
1 Message
0
October 22nd, 2017 07:00
Hi.
Did you manage to solve this issue ?
I am experiencing the same thing, thanks !
oszphill
1 Message
0
December 24th, 2020 06:00
Hi there
Did you get the solution? I have the same situation.
Daniel Quadrini
23 Posts
0
December 28th, 2020 01:00
It could be that the virtual machine was created with less than the recommended settings, like a hard disk smaller than 100 Gb. Also check if you're using the latest ImageAssist tool version.