Unsolved
This post is more than 5 years old
3 Posts
0
457
December 28th, 2007 20:00
symrdf removegrp fails
Hi,
I have a dynamic RDF group that I cannot remove because the remote symm was decommisioned without deleting the dynamic RDF pairs and RDF groups. I was able to get rid of the partitioned RDF devices via the half_deletepair command, however, I cannot remove or modify the dynamic RA groups from the symm still on the floor. I have tried both removegrp and modifygrp and even used -symforce. I get the following error from symcli:
Could not find a valid (online and connected) RA director to use for remote call.
Any ideas? I am guessing I need my CE to dial in and remove the groups from inlines or even perform a bin change.
Thanks!
null
I have a dynamic RDF group that I cannot remove because the remote symm was decommisioned without deleting the dynamic RDF pairs and RDF groups. I was able to get rid of the partitioned RDF devices via the half_deletepair command, however, I cannot remove or modify the dynamic RA groups from the symm still on the floor. I have tried both removegrp and modifygrp and even used -symforce. I get the following error from symcli:
Could not find a valid (online and connected) RA director to use for remote call.
Any ideas? I am guessing I need my CE to dial in and remove the groups from inlines or even perform a bin change.
Thanks!
null
No Events found!
xe2sdc
2 Intern
•
2.8K Posts
0
December 29th, 2007 01:00